Autodesk XW8400 Instrukcja Użytkownika Pobierz pdf (Strona 38)

Connecting System Components

4. Select the Use the following IP address option.

5. Set a static IP and Subnet mask address for the port. Select values that do not conflict with

any other machine on your network. Consider using the following values:

• IP address: 192.168.125.10

• Subnet mask: 255.255.255.0

6. Click OK twice.

To configure the Autodesk control surface on Linux-based workstations:

h On the Lustre workstation, use a text editor such as nedit to configure the network port

connected to the control surface with an unrelated static IP address that does not interfere

with any of the IP addresses on the network. Also assign an appropriate subnet mask. Type:

nedit /etc/sysconfig/network-scripts/ifcfg-eth<port#>

Modify the IPADDR and NETMASK values. For example:

IPADDR=192.168.125.10

NETMASK=255.255.255.0

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Brak uwag

Autodesk XW8400 Instrukcja Użytkownika Strona 38